BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Team Defence Information - ECPv6.15.16.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.teamdefence.info
X-WR-CALDESC:Events for Team Defence Information
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20250305T090000
DTEND;TZID=UTC:20250305T170000
DTSTAMP:20260415T235710
CREATED:20241023T090100Z
LAST-MODIFIED:20250228T102704Z
UID:247219-1741165200-1741194000@www.teamdefence.info
SUMMARY:AdM as a Service Challenge Working Groups March Event
DESCRIPTION:The first Additive Manufacturing as a Service Challenge (a.k.a Project TAMPA) Face-to-Face Working Group Event of the year will be held on Wednesday 5th March 2025 at the Digital Manufacturing Centre (DMC) in Silverstone NN12 8FU. \nPlease do not delay registering as the number of spaces is limited to 100 attendees and the spaces will be offered on a first come\, first served basis. The registration will close on 25 February 2024.  \nAim: Set the Working Group (WG) plans for 2025\, in line with the Executive Group (EG) Priorities to maximise success against the Key Performance Indicators (KPIs). \nPrimary Objectives: \n\nPresent the EG 2025 priorities\, setting the direction for the Additive Manufacturing as a Service Challenge.\nPresent the new Additive Manufacturing as a Service Challenge KPIs for the year ahead.\nThe WGs to set their own priorities for the next 9 months to maximise success against the KPIs.\n\nSecondary Objectives: \n\nTo develop the AM benefits case\, inform the WG community of the findings to date of the Hack 4 MOD task on the Whole Life Carbon Cost of AM.\nIntroduce the NATO representatives to the WG community to establish relationships.\n\nThe agenda\, which is subject to change\, is as follows: \n09:30   Arrival – Tea & Coffee \n10:00   Welcome & Housekeeping by Edit Barbantan and Kieron Salter \n10:10   Agenda and Objectives for the Day by Edit Barbantan \n10:15   Executive Group Welcome by Charlotte Robinson and Dr Ross Trepleton \n10:35   Introduction of NATO partners by Wg Cdr Jon McMahon \n10:45   AdM as a Service Challenge Updates\, by Wg Cdr Jon McMahon and Bernadette Saunders\, on: \n\nthe Advance Manufacturing Strategy;\nSpirals 1\, 2 and 3;\nHack for MOD (H4MOD) challenge\n\n11:15   H4MOD presentation by Imperial College London \n11:30   Coffee break (30 min) \n12:00   Team Defence Information Update by Stu Olden \n12:10   ASTM presentation by Dr Lauren Ednie \n12:25   DMC presentation by Kieron Salter \n12:40   Lunch + DMC tour (1 hour) \n13:40   Update from Working Groups (WG) \n14:05   Focus for Working Groups meeting by Edit Barbantan \n14:10   Working Groups Meeting \n15:10   WG Co-Chair back briefs \n16:10   Wrap-up by Charlotte Robinson and Dr Ross Trepleton \n16:30   Close \nLunch and some refreshments will be provided. Dress code – business casual; no military uniform is required. Please ensure you bring some form of photo ID with you on the day. Parking is freely available at the event location\, including at the unit across the road as it is currently vacant. \nFor any questions about the event or if you are no longer able to attend\, please contact Edit.Barbantan100@mod.gov.uk. \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here
URL:https://www.teamdefence.info/event/adm-as-a-service-challenge-working-groups-event-2/
LOCATION:Digital Manufacturing Centre Ltd\, Silverstone Park\, Silverstone\, Towcester\, NN12 8FU\, United Kingdom
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20241212T140000
DTEND;TZID=UTC:20241212T160000
DTSTAMP:20260415T235710
CREATED:20241030T121951Z
LAST-MODIFIED:20241210T101558Z
UID:247260-1734012000-1734019200@www.teamdefence.info
SUMMARY:Project TAMPA Spiral 3 Industry Q&A Session
DESCRIPTION:Dear Additive Manufacturing as a Service Members\, \nOn the 12th of December between 14:00-16:00\, we will be hosting a Q&A session regarding Spiral 3 for Project Tampa. If you would like to attend the online event\, please register using the link. \nShould you have any questions in advance\, please note them down into Slido using code #3710050. \nPlease review the attached document in preparation for the event\, but also note that this is a work in progress due to ongoing collaboration with the US team; thus\, future versions may be released prior to the event. \nMany thanks and kind regards\, \nEdit Barbantan \nDefence Support Innovation \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\nRegister here\n\n\n\n\n\n			\n				\n				\n				\n				\n				\nSupporting Documents
URL:https://www.teamdefence.info/event/project-tampa-spiral-3-industry-qa-session/
LOCATION:Virtual – MS Teams
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20241022T083000
DTEND;TZID=UTC:20241022T163000
DTSTAMP:20260415T235710
CREATED:20240828T151453Z
LAST-MODIFIED:20241018T143634Z
UID:246707-1729585800-1729614600@www.teamdefence.info
SUMMARY:AdM as a Service Challenge Working Groups Event
DESCRIPTION:The 22nd October Additive Manufacturing as a Service Challenge face-to-face event is quickly approaching and is now fully subscribed. If you are no longer able to attend\, please let Edit know. \nThe event address is Thales UK\, 350 Longwater Ave\, Green Park Business Park\, Reading\, RG2 6GF. Further information on how to get there can be found in the attached documents. \nLunch and some refreshments will be provided. Dress code – business casual; no military uniform is required. \nThe aim of the event is to consolidate learning to date for input into the Executive Group Priorities for 2025. \nThe objectives are to share lessons identified from Spiral 1 across MOD and Industry and to use scenario-based exercises as a tool to test the Advanced Manufacturing strategy and stimulate a deeper understanding of the strengths\, opportunities\, weaknesses\, and threats to AM adoption and how action can be taken to exploit or avoid these. The outputs of this exercise will inform the Executive Group Priorities for 2025. \nThe agenda is as follows: \n08:30   Arrival – Tea & Coffee ​ \n09:00   Welcome & Housekeeping  \n09:05   Agenda and Objectives for the Day  \n09:10   Executive Group Welcome by Charlotte and Ross Trepleton \n09:30   Update on Decision Point and future Spirals  \n09:40   Spiral Journey – Thales (20 mins speaking +10 Q&A)​ \n10:10   Spiral Journey – RBSL (20 mins speaking +10 Q&A)​ \n10:40   Coffee break \n11:00   Spiral Journey – Babcock + DE&S artillery systems team (20 mins speaking +10 Q&A)​ \n11:30   Spiral Journey – AMFG (20 mins speaking +10 Q&A)​ \n12:00   Spiral Journey – NP Aerospace (20 mins speaking +10 Q&A)​ \n12:30   Lunch break​ \n13:20   Thales presentation  \n13:50   Team Defence Info Brief and Update  \n14:00   Working Groups knowledge share session \n14:30   Coffee break \n14:50   Refresh on Advanced Manufacturing Champion direction \n15:00   Table top exercise \n16:20   Closing remarks \n16:30  Close \nPlease ensure you bring some form of photo ID with you on the day. \nIf you have any questions\, please contact Edit. \nMany thanks\,Edit Barbantan \nFollow the link below for the new ATI AM Strategy and Roadmap \nAdditive-Manufacturing-Strategy-Roadmap-Sept-2024-Final.pdf (ati.org.uk) \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here
URL:https://www.teamdefence.info/event/adm-as-a-service-challenge-working-groups-event/
LOCATION:Thales UK\, 350 Longwater Ave\, Green Park Business Park\, Reading\, RG2 6GF
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240701T090000
DTEND;TZID=UTC:20240701T163000
DTSTAMP:20260415T235710
CREATED:20240517T100146Z
LAST-MODIFIED:20240517T100149Z
UID:246222-1719824400-1719851400@www.teamdefence.info
SUMMARY:AdM as a Service Challenge Working Groups
DESCRIPTION:The next Additive Manufacturing as a Service Challenge\, also known as project TAMPA\, Face-to-Face Working Group Event will be held on Monday 1 July 2024 at Babcock Business Park in Bristol.  \nPlease do not delay registering as the number of spaces is limited to 80 attendees and the spaces will be offered on a first come\, first served basis. The registration will close on 17 June 2024.  \nThe aim and agenda of the day will be released closer to the event. The event will include a face-to-face working group session and the Chief of Defence\, Logistics and Support (CDLS) will be the keynote speaker.  \nAddress: Unit 100B Bristol Business Park\, Stoke Gifford\, Bristol BS16 1EJ \nPlease note all fields are mandatory on registration\, you will not be able to attend if we do not have this information. Please also opt in to share your data as your emails will need to be provided to the Venue. \nIf you have any questions please contact Edit Barbantan or Kelly. \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here
URL:https://www.teamdefence.info/event/adm-as-a-service-challenge-working-groups-2/
LOCATION:Babcock Business Park\, Unit 100B Bristol Business Park\, Stoke Gifford\, Bristol\, BS16 1EJ\, United Kingdom
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240626T090000
DTEND;TZID=UTC:20240626T163000
DTSTAMP:20260415T235710
CREATED:20240415T132333Z
LAST-MODIFIED:20240625T215427Z
UID:246211-1719392400-1719419400@www.teamdefence.info
SUMMARY:Modelling Towards Self Sufficiency - a Sustainable Defence Support Working Group
DESCRIPTION:Concept \nIntegrating advanced sustainable technologies\, technical insight and industry knowledge on Military Operations has the potential to reduce logistic burden\, extend the time a force can operate without resupply and reduce operating costs.  This will increase supply chain resilience\, give Commanders’ freedom to operate and help create operational advantage over our adversaries. It may even reduce or mitigate the climate impact of military operations. \nOutline of Activities \nDefence Support released their Toward Self Sufficiency Concept Note in November 2023. It outlines a number of hypotheses for how a self-sufficient approach to military operations could deliver operational advantage\, and identifies areas for innovation\, research and experimentation.  Defence Support are now investigating how digital modelling can be used to consistently and repeatably contextualise how new technologies perform in simulated military environments. Understanding the benefits of a novel\, sustainable technology in the context of military operations will help assess the opportunities and inform early capability investment decisions. \nAt this event we will hear from academia\, Defence organisations and others about their prioritisation of low carbon and self-sustaining solutions along with the tools and information they use to inform and prioritise their investments. \nThe current thinking about the Toward Self Sufficiency model will then be shared and this will be followed by a workshop where your input will help inform the next stages of development. \nYour Input \nIn the afternoon workshops\, Defence Support invite you to challenge their modelling assumptions\, suggest how wider modelling practice could be utilised\, identify how benefits\, service levels and KPIs could be measured and promote how your innovative water\, waste\, energy\, material solutions could be modelled. \nOutcome \nThe workshop will assist the scoping and development of the Towards Self Sufficiency model development so that it will be more effective at assessing technologies that will lead to more self sufficient and sustained operations. \nWho Should attend \nProviders of deployable base infrastructure\, utilities and innovators in material\, food\, waste\, water\, energy and circular economics along with lifecycle modellers who can help understaffs what could\, should and must (& must not) be measured as part of a self-sufficiency modelling tool.  We also need to understand enablers that will enable support data capture\, connectivity\, processing\, and performance management. \nRegister to Attend \nThe event is free to attend.  There will be limited in person attendance with wider online participation. In person tickets will be allocated on a first come first served basis and limited to one person per company.  \nDress \nSmart casual or uniform as applicable \n  \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				Click here to register\n			\n				Agenda\n			\n				Towards Self Sufficiency - Concept Note
URL:https://www.teamdefence.info/event/modelling-towards-self-sufficiency-a-sustainable-defence-support-working-group/
LOCATION:University of Southampton Future Town Innovation Hub\, Future Towns Innovation Hub (Building V)\, The Engineering Centre\, University of Southampton Science Park\, Southampton\, Southampton\, SO16 7PU\, United Kingdom
CATEGORIES:Sustainable Defence Support,Sustainable Defence Support -Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240319T090000
DTEND;TZID=UTC:20240319T163000
DTSTAMP:20260415T235710
CREATED:20231130T133525Z
LAST-MODIFIED:20240228T144819Z
UID:245165-1710838800-1710865800@www.teamdefence.info
SUMMARY:AdM as a Service Challenge Working Groups
DESCRIPTION:The next Additive Manufacturing as a Service Challenge Face-to-Face Working Group Event will be held on Tuesday 19th March 2024 at the University of Sheffield Advanced Manufacturing Research Centre (AMRC) Knowledge Transfer Centre . The event is kindly hosted and sponsored by Kaizen PLM and Siemens. \nPlease do not delay registering as the number of spaces is limited to 150 attendees and the spaces will be offered on a first come\, first served basis. The registration will close on 6th March 2024. \nThe aim of the event is to discuss priorities for 2024\, review the annual report conclusions and present the successful Spiral 2 parts. \nThe agenda for the day is as follows: \n09:00   Arrival – Tea & Coffee ​ \n09:30   Welcome & Housekeeping​ \n09:35   Agenda\, CDLS welcome\, and Objectives for the Day​ \n09:45   Annual review survey ​ \n09:55   Executive Group Welcome & priorities for 2024​ \n10:15   Kaizen PLM & Siemens presentations​ \n11:15   Coffee break​ \n11:45   Overview of successful Spiral 2 proposals​ \n12:00   Stalls: Spiral 2 Stalls part 1​ \n13:00   Lunch + tour * \n14:00   Stalls: Spiral 2 Stalls part 2 ​ \n15:00   Working Group Meetings​ \n16:00   WG Co-Chair Summaries & Wrap up​ \n16:30   Close \n*Please note there is a limited number of spaces available for the shop floor tour. PPE is required for the tour and safety shoes are mandatory. The AMRC can provide some PPE and safety shoes\, however if you have your own pair then please bring them. The shoes should have as a minimum requirement a sole plate with a toe cap and have slip resistant thread. \nThe event address is: Advanced Manufacturing Park\, University of Sheffield\, Knowledge Transfer Centre\,  Brunel Way\, Catcliffe\, Rotherham S60 5TZ \nParking is available on site on a first come first serve basis. \nIf you have any questions about the registration process\, please contact Kelly . If you have any questions about the event\, then please contact Edit or Stu. \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here
URL:https://www.teamdefence.info/event/adm-as-a-service-challenge-working-groups/
LOCATION:Advanced Manufacturing Park\, University of Sheffield\, Knowledge Transfer Centre\, Brunel Way\, Catcliffe\, Rotherham\, S60 5TZ
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240123T100000
DTEND;TZID=UTC:20240123T120000
DTSTAMP:20260415T235710
CREATED:20231205T112525Z
LAST-MODIFIED:20231206T150638Z
UID:245163-1706004000-1706011200@www.teamdefence.info
SUMMARY:AdM as a Service Inventory Management Working Group (IMWG)
DESCRIPTION:The aim of the IMWG is to identify IM issues that would prevent Project TAMPA Spirals proceeding & facilitate wider pan MoD/Industry progress and engagement on AdM IM issues. \nAgenda for the IMWG below\, thanks. \nAttendee list  \nNotes & Actions from last meeting(s) \nUpdates: NATO Codification Committee\, Local Manufacturing Policy\, Obsolescence Management Policy\, Procurement Policy \nIndustry feedback on AM projects (lessons learned\, issues\, experiences etc.) – please feed in any points. \nProject TAMPA – Update & LFE \nAOB \nDONM \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here
URL:https://www.teamdefence.info/event/adm-as-a-service-inventory-management-working-group-imwg/
LOCATION:virtual
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231012T093000
DTEND;TZID=UTC:20231012T163000
DTSTAMP:20260415T235710
CREATED:20230712T140655Z
LAST-MODIFIED:20231110T105253Z
UID:243734-1697103000-1697128200@www.teamdefence.info
SUMMARY:AdM as a Service Challenge Working Groups
DESCRIPTION:The Additive Manufacturing as a Service Challenge Face-to-Face Working Group Meeting will be held on Thursday 12 October 2023 at the Defence Manufacturing Centre (DMC) in Silverstone\, Towcester. \nPlease do not delay registering as the number of spaces is limited to 100 attendees and the spaces will be offered on a first come\, first served basis. The registration will close on 5 October 2023.  \nThe aim of the event will be for the working groups to problem solve Spiral 1 issues to date. \nThe agenda is as follows: \n\n09:30   Arrival – Tea & Coffee ​\n10:00   Welcome & Housekeeping​\n10:10   Agenda and Objectives for the Day​\n10:15   Executive Group Welcome​\n10:30   DMC & Vistory presentations​\n11:00   Coffee break​\n11:20   AdM as a Service Challenge update​\n11:30   Update on Additive Manufacture Capabilities Knowledge Capture activity​\n11:45   Lunch + DMC tour (Integration Task Force working lunch)​\n13:45   Spiral 1 issues and focus for Working Groups​\n14:00   Working Group Meetings​\n16:00   WG Co-Chair Summaries & Wrap up​\n16:30   Close\n\nPlease confirm your details via the Registration link if you wish to attend. \n  \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here\n\n\n\n\n\n			\n			\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				Upcoming Events AdM as a Service Challenge Working ... 02/Jun - 03/Jun 2026 View event PJ TAMPA (Additive Manufacturing as... 21/Oct/2026 View event Recent Events March Event - Additive Manufacturin... 04/Mar/2026 View event PJ TAMPA Digital Thread Working Gro... 22/Jan/2026 View event AdMaaS Digital Thread Working Group... 18/Nov/2025 View event
URL:https://www.teamdefence.info/event/adm-as-a-service-certification-working-group-2/
LOCATION:Digital Manufacturing Centre Ltd\, Silverstone Park\, Silverstone\, Towcester\, NN12 8FU\, United Kingdom
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230628T093000
DTEND;TZID=UTC:20230628T170000
DTSTAMP:20260415T235710
CREATED:20230530T152125Z
LAST-MODIFIED:20231110T105342Z
UID:243430-1687944600-1687971600@www.teamdefence.info
SUMMARY:AdM as a Service Challenge Working Group - 28 June 2023
DESCRIPTION:The Additive Manufacturing as a Service Challenge Face-to-Face Working Group Meeting will be held on Wednesday 28 June 2023 at the Babcock International Group Headquarters\, Bristol. \nPlease do not delay registering as the number of spaces is limited to 100 attendees and the spaces will be offered on a first come\, first served basis. The registration will close on 21 June 2023. Please note that due to site security restrictions\, D.O.B and Nationality details are required for security checks. These details will be removed from our records when no longer required.  \nThe purpose of the event is to understand Spiral 1 proposals and for WG attendees to be briefed on key challenges to date ahead of time\, to discuss and address in their WG meetings. \nThe agenda is as follows: \n\n09:30  Arrival – Tea & Coffee \n10:00  Welcome & Housekeeping (Babcock & MOD)\n10:15  Welcome and Initial briefing (Exec Group Co-Chairs) – Objectives for the day\n10:30  Future Capabilities Group – Challenge update and an overview of successful proposals for Spiral 1\n10:45  Coffee break \n11:15  Stalls: Spiral 1 Stalls \n12:15  Lunch\n13:30  Stalls: Spiral 1 Stalls – continued \n14:30  Working Group Meetings \n16:30  Wrap up and key themes\n16:45  Close\n\nDue to site security restrictions\, D.O.B and Nationality details are required for security checks. The details will be removed from our records when no longer required\, as per our data security policy. \nPlease confirm your details via the Registration link if you wish to attend. \n  \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here\n\n\n\n\n\n			\n				\n				\n				\n				\n				\nWebsite Privacy Policy\n\n\n\n\n\n			\n			\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				Upcoming Events AdM as a Service Challenge Working ... 02/Jun - 03/Jun 2026 View event PJ TAMPA (Additive Manufacturing as... 21/Oct/2026 View event Recent Events March Event - Additive Manufacturin... 04/Mar/2026 View event PJ TAMPA Digital Thread Working Gro... 22/Jan/2026 View event AdMaaS Digital Thread Working Group... 18/Nov/2025 View event
URL:https://www.teamdefence.info/event/adm-as-a-service-challenge-working-groups-28-june-2023/
LOCATION:Babcock Technology Centre\, Bristol Business Park\, Stoke Gifford\, Bristol\, BS16 1EJ
CATEGORIES:AdM WG,CDLS AdM as a Service WG,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20230403
DTEND;VALUE=DATE:20230405
DTSTAMP:20260415T235710
CREATED:20230215T170441Z
LAST-MODIFIED:20230320T173938Z
UID:242728-1680480000-1680652799@www.teamdefence.info
SUMMARY:FCG OIL ADM HACK
DESCRIPTION:The Future Capability Group (FCG) Open Innovation Laboratories (OIL) Additive Manufacture Hack will take place on the 3 & 4 April 23. \nWe recently held a launch and network event the details of which are here: Additive Manufacturing Hack Launch and Networking 9 February 2023[9] \nEven if you did not attend the launch event it is not too late to join a team. \n\nBy Close of business Friday 17 February simply complete the MS Forms data capture sheet and express your interest and statement of capabilities.  Details will then be shared to allow collaborative teams to form:\n\nContact Details and Skill Summary Form \n\n\nOn 20 February contact details will be shared*\nBy 3 March Teams should have submitted their applications\nBy 17 March Teams will be informed if they have been successful\n\n*GDPR the details submitted will be shared solely for teh purpose of building teams for the event\, Details shoudl not be shared for any other purposes and must not be used for any marketing or cold calling.
URL:https://www.teamdefence.info/event/fcg-oil-adm-hack/
CATEGORIES:CDLS AdM as a Service WG,FCG OIL-Public,RTI,RTI-Public
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230324T093000
DTEND;TZID=UTC:20230324T163000
DTSTAMP:20260415T235710
CREATED:20221128T123114Z
LAST-MODIFIED:20230712T115436Z
UID:242165-1679650200-1679675400@www.teamdefence.info
SUMMARY:(4th) AdM As A Service Working Group - 24 March 2023
DESCRIPTION:The 4th AdM As a Service Working Group (WG) will be held at the Manufacturing Technology Centre (MTC)\, Coventry on the 24th March 2023. The WG will provide attendees with the ability to engage with AdM colleagues across the UK MoD\, Academia and Industry (OEMs & SMEs)\, and will consist of industry and MoD briefings on current AdM activities and the AdM as a Service Challenge (Project TAMPA). There will also be the opportunity to engage in the Working Group discussions on the key focus topics of Certtification\, Inventory management and the Digital Thread. This will be an in person meeting only.. \nShould you wish to attend\, please confirm your details via the Registration link. \n  \n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				\n				\n				\n				\n				\nRegister here
URL:https://www.teamdefence.info/event/4th-adm-as-a-service-working-group-9-february-2023/
LOCATION:The Manufacturing Technology Centre (MTC)\, Ansty Park\, Coventry\, CV7 9JU\, United Kingdom
CATEGORIES:AdM WG,CDLS AdM as a Service WG
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20221123T090000
DTEND;TZID=UTC:20221123T170000
DTSTAMP:20260415T235710
CREATED:20221006T113844Z
LAST-MODIFIED:20221122T100811Z
UID:241871-1669194000-1669222800@www.teamdefence.info
SUMMARY:DIGITAL MODELS\, SHADOWS & TWINS: TOWNHALL
DESCRIPTION:General.  The Digital Catapult will host a Defence Support Digital Twin COP townhall brief where we will look to share Defence ambition and plans for digital models\, shadows\, and twins with a view to collaboration and exploitation with wider activities and investment across industry sectors \nFormat. This will be a Hybrid event \n\nPhysical attendance for 90 people theatre style with networking breaks\nVirtual via Digital catapult zoom conference facilities\n\nAgenda \n\n\n\nTime\nTopic\nOrganisation\nSpeaker\n\n\n09oo-0930\nCoffee & Registration\n\n\n0930-0935\nWelcome and site safety\nDigital Catapult\nNick Wright\n\n\n0935-0945\nIntroduction and Agenda\nTeam Defence Information\nSteve Green\n\n\nSession 1 – Context for Federation\n\n\n0945-1005\nNational Digital Twin Programme\nBEIS\n\nAlexandra Luck CEng\, FICE\, FCIHT \nJoint Policy Lead – National Digital Twin Programme \n  \n\n\n\n1005-1025\nEnterprise Architecture and Support Chain Digital Thread\nDef Sp CIO\nRichard Puttick\n\n\n1025-1045\nDigital Twin Centre and International Best Practice\nDigital Catapult\nRobert Smith\n\n\n1045-1115\nQ&A\n\n\n1115-1145\nNetworking Break\n\n\nSession 2 Design & Manufacture\n\n\n1145-1205\nDigital Tread & Through Life MBE\nFuture Combat Air System (FCAS) Digital Workstream\nGordon McLeod\n\n\n1205-1225\nDesign to Manufacture and Market readiness levels\nDE&S FCG High Value Manufacture\nRichard Hamber\n\n\n1225-1245\nApollo Protocol\nAMRC\nJonatan Eyre\n\n\n1245-1315\nQ&A\n\n\n1315-1415\nNetworking Lunch\n\n\nSession 3 Test\, Evaluation and Use\n\n\n1415-1435\nDigital Test and Evaluation\nMil Cap Future T&E\nTBC Brain Gillett\n\n\n1435-1455\nDigital Engineering and Strategic Asset Management\nDefence Support Engineering Support Transformation\nPhil Tullit\n\n\n1455-1515\nPeople\, Places Things\nConnected Places Digital Twin Hub\nMark Enzer\n\n\n1515 – 1615\nQ&A\n\n\n1615\nDispersal\n\n\n\n  \n			\n			\n				\n				\n				\n				\n				\n				Register
URL:https://www.teamdefence.info/event/digital-models-shadows-twins-townhall/
LOCATION:Digital Catapult\, 101 Euston Road\, London\, NW1 2RA\, 101 Euston Road\,\, London\, NW1 2RA\, United Kingdom
CATEGORIES:RTI,RTI-Public
ORGANIZER;CN="Steve Green":MAILTO:steve.green@teamdefence.info
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20221014T100000
DTEND;TZID=UTC:20221014T140000
DTSTAMP:20260415T235710
CREATED:20220808T083524Z
LAST-MODIFIED:20221005T140408Z
UID:241284-1665741600-1665756000@www.teamdefence.info
SUMMARY:TD-Info Futures: Low Carbon Bases Workshop
DESCRIPTION:Aim\nThe aim of this workshop is to explore how the carbon footprint of deployed operational bases can be reduced\n \nTask Summary\nThis task will increase understanding of Defence’s operational infrastructure carbon footprint and how through design\, commercially available solutions and emerging technology low carbon deployments can be realised\n \nOutput\nThe output will inform operational infrastructure policy\, design specifications and experimentation plans\n \nWho Should attend\nEco warriors\, infrastructure engineers and providers of low carbon energy solutions\n \nAgenda\n\n1.Introductions\n2.Aim & Objectives\n3.Low carbon operational infrastructure concept – Def Sp Futures Air Cdre Baker\n4.Designing out demand – UK StartCom Infra / Institution of RE WO1 Peter (Casper) Egan\n5.Climate Change & Sustainability Operational Base Footprint Model AADP Lt Col Henry Waller\n6.Smart Grids & Low Carbon Technology Solutions Workshop\n7.Plenary\n\n \nEvent Format\nThis will be a hybrid event with limited in person spaces and option to dial in.\nObviously the ability to workshop is enhanced through physical attendance so please do your best to come along..\n \nLocation\nThe event will be hosted by Frazer-Nash Consulting Bristol\n \nRefreshments\nTea. Coffee and a light lunch will be provided.\n			\n			\n				\n				\n				\n				\n				\n				\n				\n				\n				\n				\n			\n				Register
URL:https://www.teamdefence.info/event/td-info-futures-low-carbon-bases-workshop/
LOCATION:Frazer-Nash Consultancy\, Narrow Quay House\,\, Bristol\, BS1 4QA\, United Kingdom
CATEGORIES:Sustainable Defence Support,Sustainable Defence Support -Public
ORGANIZER;CN="Steve Green":MAILTO:steve.green@teamdefence.info
END:VEVENT
END:VCALENDAR